KNX IP Interface | IPI.1.1.1

The KNX IP-Interface IPI.1.1.1 is used to connect a PC to the KNX network. The connection is made through LAN (IP). The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively. This device works according to the KNXnet/IP specification using the core, the device management and the tunneling part.

Download PDF Datasheet

KNX IP Router | IPR.1.1.1

The KNX IP Router IPR.1.1.1 allows forwarding of telegrams between different lines through a LAN (IP) as a fast backbone. In addition this device is suited to connect a PC to the KNX network (e.g. for ETS programming). The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively.

This device works according to the KNX net/IP Router specification using the core, the device management, the tunneling and the routing part. The KNX IP Router has a filter table and is able to buffer up to 150 telegrams.

Download PDF Datasheet

KNX USB Interface | USB.1.1.1

The KNX USB.1.1.1 Interface is for establish a bidirectional connection between a PC and the KNX bus. The USB connector has a galvanic separation from the KNX bus. The interface is supportet by the ETS software.

Download PDF Datasheet